+45 9669 4710
info@palomat.com 
PALOMAT® Greenline offers fully automatic stacking and destacking, and it operates completely on AC power.
Choose a PALOMAT® Greenline if you plan to both stack and destack single pallets and wish to use only electricity as the power source.
The PALOMAT® Greenline is also available for handling pallets in cold rooms with temperatures as low as –25°C / –13°F (Only available for 15 pallets / 500 kg.).
The PALOMAT Greenline is designed for automatic pallet stacking and destacking using a touch-panel interface. It only requires a 230 V power supply.
The user can insert or remove pallets using a stacking truck or fork lift truck at floor level. The PALOMAT Greenline detects the pallets using photo sensors and automatically stacks or destacks them one by one.
When selecting destacking, the PALOMAT can handle a stack of up to 15 or 25 pallets, which are then destacked automatically. When selecting stacking, the pallets are inserted one by one and automatically stacked to a maximum of 15 or 25 pallets. The entire stack can then be removed.
The touch panel is used to switch between stacking and destacking modes, but otherwise the PALOMAT Greenline operates automatically. The pallet magazine/dispenser is a standard model but can accommodate a wide variety of pallet types and sizes, with custom solutions available for specific customer needs.
|
Energy: |
220-240VAC / 50 Hz |
|
Standby Consumption: |
23 W |
|
Consumption during operation: |
550 W (at max. load of 500 kg) |
|
Noise Level: |
70 dB(A) |
|
Max. Fuse: |
16A D01 |
|
Steering: |
Siemens S7-1200 |
|
Energy: |
220-240VAC / 50 Hz |
|
Standby Consumption: |
23 W |
|
Consumption during operation: |
600 W (at max. load of 700 kg) |
|
Noise Level: |
70 dB(A) |
|
Max. Fuse: |
16A D01 |
|
Steering: |
Siemens S7-1200 |
As the PALOMAT is equipped with various sensors, wires and pipes, cleaning must only be carried out with a weak alkaline cleaning agent. The PALOMAT must not be flushed, but only wiped with a damp cloth.
Contact the PALOMAT sales department or the nearest PALOMAT dealer for further information.
| Product No. | Pallet size (L x W x H) | Lifting capacity | Number of pallets |
|
|
|||
| 152001 | 1200x800x144 | 500 kg | 15 pallets |
|
|
|||
| 152002 | 1200x1000x150 | 500 kg | 15 pallets |
|
|
|||
| 152101 | 1200x800x144 | 700 kg | 25 pallets |
|
|
|||
| 152102 | 1200x1000x150 | 700 kg | 25 pallets |
|
|
|||
The PALOMAT has the same function as a standard PALOMAT Greenline. All PALOMAT parts are made in stainless steel and therefore ideal for wet areas, e.g. in the production. It is very well suited to the food processing industry. The PALOMAT can be cleaned with a weak alkaline cleaning agent.
| Product No. | Pallet size (L x W x H) | Lifting capacity | Number of pallets |
|
|
|||
| 152001-SS | 1200x800x144 | 500 kg | 15 pallets |
|
|
|||
| 152002-SS | 1200x1000x150 | 500 kg | 15 pallets |
|
|
|||
A safety frame is not a legal requirement but is recommended - especially if the PALOMAT will stand freely in a room.
It is also possible to obtain a safety frame with a gate.
The gate is a part of the safty frame and is mounted for added safety. The PALOMAT® can only be operated when the gate is closed and locked with the gate safety switch. The gate covers the right front from the top of the second pallet at floor level to the top of the safety frame.
A Sick-sensor for indicating when a pallet stack automatically should be destacked onto the floor.
If the user for examples wants the PALOMAT® to stop at 15 pallets, a maximum indicator can be mounted on the safety frame or on a pole. When the maximum indicator indicates the specified number of pallets, the stack is automatically put on the floor. The stack is then ready for pickup by for example a stacker.
The function can also be done manually using the touch panel.
A signal tower including a Sick sensor that detects when the pallet stack is full.
If the PALOMAT® needs to stop e.g. at 15 pallets, the signal tower with a maximum indicator can be mounted on the safety frame or on a bar. When the maximum indicator is actuated, e.g. at 15 pallets, the lamp lights blue and the stack is automatically put down on the floor. The stack is then ready for pick-up, e.g. by a hand pallet truck.
The truck protection is produced in 10 mm steel and can be offered as an extra protection of the front sensors.
The truck protection is two separate parts, which are mounted into the floor in front of the PALOMAT®. The solution is used especially by companies, which handle pallets by forklifts.
The truck protection is produced in 10 mm steel and can be offered as an extra protection of the front sensors.
The truck protection is two separate parts, which are mounted into the floor in front of the PALOMAT®. The solution is used especially by companies, which handle pallets by forklifts.
The truck protection is produced in 10 mm steel and can be offered as an extra protection of the front sensors.
The truck protection is two separate parts, which are mounted into the floor in front of the PALOMAT®. The solution is used especially by companies, which handle pallets by forklifts.
The stop blocks are a perfect option when the PALOMAT® needs to handle pallets where the runners at the bottom are crosswise to the hand pallet truck. When pulling out the hand pallet truck from the PALOMAT®, the two stop blocks hold the pallet in place, keeping it in the magazine.
The stop blocks are installed at the front of the PALOMAT®, one on each side next to the front sensors.
The switch disconnector enables disconnection from the main supply right on the machine. The switch disconnector can be locked, e.g. when servicing the machine.
This is an advantage and a safety feature for maintenance of the PALOMAT® unit. The switch disconnector is positioned under the main supply.
The PALOMAT can be modified with other actuators to enable pallet handling in cold environments down to –25°C.
NB. Only available for the pallet magazine for 15 pallets / 500 kg.
Our service kit contain the necessary spare parts + tools, for PALOMAT® Greenline. In here, you always have the most important spare parts gathered in one place.
An interface sends an e-mail or SMS to the responsible for the PALOMAT®, e.g. when the magasin is empty or when there is an error with the PALOMAT®. It is installed with a mobile data sim-card (delivered by the customer) or a patchcabel, which is connected to the company’s network.
| Brochures |
 |
| Data sheets |
 |
| Feature videos |
 |
| Installation videos |
 |
The first PALOMAT® was developed in 1992 because one of the owners himself suffered from back problems. This created the need for a machine for pallet handling at floor level. In this way, employees could avoid manual pallet handling and heavy lifting.Read more about PALOMAT®
