For the pallet magazine PALOMAT® Adjustable we offer the following options:

Option - Safety frame with gate for 15 pallets for pallet magazine PALOMAT®

Safety frame with gate for 15 pallets

The gate is a part of the safty frame and is mounted for added safety. The PALOMAT® can only be operated when the gate is closed and locked with the gate safety switch. The gate covers the right front from the top of the second pallet at floor level to the top of the safety frame.

 
Option - Maximum indicator for pallet magazine PALOMAT

Maximum indicator

A Sick-sensor for indicating when a pallet stack automatically should be destacked onto the floor.

If the user for examples wants the PALOMAT® to stop at 15 pallets, a maximum indicator can be mounted on the safety frame or on a pole. When the maximum indicator indicates the specified number of pallets, the stack is automatically put on the floor. The stack is then ready for pickup by for example a stacker.

The function can also be done manually using the touch panel.

 
Option - Signal tower incl. maximum indicator for pallet magazine PALOMAT®

Signal tower incl. maximum indicator

A signal tower including a Sick sensor that detects when the pallet stack is full.

If the PALOMAT® needs to stop e.g. at 15 pallets, the signal tower with a maximum indicator can be mounted on the safety frame or on a bar. When the maximum indicator is actuated, e.g. at 15 pallets, the lamp lights and the stack is automatically put down on the floor. The stack is then ready for pick-up, e.g. by a hand pallet truck.

 
Option - Truck protection for the pallet magazine PALOMAT

Truck protection

The truck protection is produced in 10 mm steel and can be offered as an extra protection of the front sensors.

The truck protection is two separate parts, which are mounted into the floor in front of the PALOMAT®. The solution is used especially by companies, which handle pallets by forklifts.

 
Option - Stopblocks for the pallet magazine PALOMAT®

Stopblocks

The stop blocks are a perfect option when the PALOMAT® needs to handle pallets where the runners at the bottom are crosswise to the hand pallet truck. When pulling out the hand pallet truck from the PALOMAT®, the two stop blocks hold the pallet in place, keeping it in the magazine.

The stop blocks are installed at the front of the PALOMAT®, one on each side next to the front sensors.

 
Option - Switch disconnector for the pallet magazine PALOMAT

Switch disconnector

The switch disconnector enables disconnection from the main supply right on the machine. The switch disconnector can be locked, e.g. when servicing the machine.

This is an advantage and a safety feature for maintenance of the PALOMAT® unit. The switch disconnector is positioned under the main supply.

 
Option - Shut Of Valve for PALOMAT® pallet magazine

Shut Of Valve

The shut off valve enables disconnection from the air supply right on the machine. The shut off valve can be locked, e.g. when servicing the machine.

This is an advantage and a safety feature for maintenance of the PALOMAT® unit. The shut of valve is installed directly on the filter regulator.

 
Option - Prepared for AGV

Prepared for AGV

Prepared for communication with AGV Truck. The PALOMAT® sends a message to the AGV, when the magazine is empty/ full, is ready for delivering/receiving pallets or in case of error respectively.

 
Prepared for information via SMS/E-mail

Prepared for information via SMS/E-mail

An interface sends an e-mail or SMS to the responsible for the PALOMAT®, e.g. when the magasin is empty or when there is an error with the PALOMAT®. It is installed with a mobile data sim-card (delivered by the customer) or a patchcabel, which is connected to the company’s network.