Stacking and destacking of 1 pallet

PALOMAT® ½ Pallets

Electric pallet dispenser Frost proof pallet dispenserAir and electric pallet dispenser

The pallet magazine/ pallet dispenser PALOMAT ½ Pallets - which is a part of our Stand Alone line - stacks and destacks empty ½-pallets fully automatic.You insert or remove the pallets using a hand pallet truck, electric stacker or a full-size forklift truck. All handling is carried out at floorlevel. The PALOMAT ½ Pallets detects the ½-pallets via photo sensors after which they are fully automatic stacked or destacked one by one.

When selecting destacking, a stack of no more than 15 ½-pallets will be inserted in the PALOMAT, after which the pallets are fully automatic destacked one by one. When selecting stacking, the ½-pallets are inserted one by one, after which the pallets are fully automatic stacked to no more than 15 pallets. The entire stack can subsequently be removed.

PALOMAT ½ Pallets is only operated manually using the touch panel when there is to be a change between stacking and destacking or vice versa. In addition to this, the PALOMAT ½ Pallets operates fully automatic.

PALOMAT ½ Pallets is offered both as a Greenline (AC operated) and a Flexomatic (air + AC operated) version.

The PALOMAT can handle all 4-way pallets in wood, plastic and metal no matter what the length, width or height. We can customise the PALOMAT ½ Pallets to exactly match the pallet size you use.

As an option the PALOMAT ½ Pallets can be delivered for cold environments down to -25 °C.

Contact the PALOMAT sales department or the nearest PALOMAT dealer for further information.

Pallemagasin PALOMAT® ½ Pallets med overbygning for 15 paller
Touchpanel på PALOMAT® ½ Pallets
Se hvordan du bruger en PALOMAT®
Se fordelene med PALOMAT®

Need more info about the PALOMAT® ½

Capacity - 500 kg (Flexomatic version)

Air supply:

6-7 bar

Consumption:

36 litres per cycle

Power source:

100-240VAC 50 -60 Hz

Standby Consumption:

16W

Consumption during operation:

20 W

Noise Level:

70 dB (A)

Max. Fuse:

16 A D01

Air components:

SMC

Steering:

Siemens S7-1200


Capacity - 500 kg (Greenline version)

Power source:

220-240VAC 50 Hz

Standby Consumption:

23 W

Consumption during operation:

550 W (at max. load of 500 kg)

Noise Level:

70 dB (A)

Max. Fuse:

16 A D01

Actuator:

Linak

Steering:

Siemens S7-1200

 

As the PALOMAT is equipped with various sensors, wires and pipes, cleaning must only be carried out with a weak alkaline cleaning agent. The PALOMAT must not be flushed, but only wiped with a damp cloth.

Contact the PALOMAT sales department or the nearest PALOMAT dealer for further information.

PALOMAT ½ Pallets for 15 ½-pallets

Article no. Pallet size (L x W x H) Lifting capacity Number of pallets

150050* 600x800x150 500 kg 15 ½-pallets

152050** 600x800x150 500 kg 15 ½-pallets


* Flexomatic version: Air + AC operated
** Greenline version: AC operated

Note: The safety frame for 15 pallets with a gate for PALOMAT ½ Pallets is required.
 

Contact the PALOMAT sales department or the nearest PALOMAT dealer for further information.

For pallet magazine PALOMAT® ½ pallets we offer the following options:

Option - Maximum indicator for pallet magazine PALOMAT
Maximum indicator

A Sick-sensor for indicating when a pallet stack automatically should be destacked onto the floor.

If the user for examples wants the PALOMAT® to stop at 15 pallets, a maximum indicator can be mounted on the safety frame or on a pole. When the maximum indicator indicates the specified number of pallets, the stack is automatically put on the floor. The stack is then ready for pickup by for example a stacker.

The function can also be done manually using the touch panel.

Option - Signal tower incl. maximum indicator for pallet magazine PALOMAT®
Signal tower incl. maximum indicator

A signal tower including a Sick sensor that detects when the pallet stack is full.

If the PALOMAT® needs to stop e.g. at 15 pallets, the signal tower with a maximum indicator can be mounted on the safety frame or on a bar. When the maximum indicator is actuated, e.g. at 15 pallets, the lamp lights and the stack is automatically put down on the floor. The stack is then ready for pick-up, e.g. by a hand pallet truck.

Option - Truck protection for the pallet magazine PALOMAT
Truck protection

The truck protection is produced in 10 mm steel and can be offered as an extra protection of the front sensors.

The truck protection is two separate parts, which are mounted into the floor in front of the PALOMAT®. The solution is used especially by companies, which handle pallets by forklifts.

Option - Stopblocks for the pallet magazine PALOMAT®
Stopblocks

The stop blocks are a perfect option when the PALOMAT® needs to handle pallets where the runners at the bottom are crosswise to the hand pallet truck. When pulling out the hand pallet truck from the PALOMAT®, the two stop blocks hold the pallet in place, keeping it in the magazine.

The stop blocks are installed at the front of the PALOMAT®, one on each side next to the front sensors.

Option - Switch disconnector for the pallet magazine PALOMAT
Switch disconnector

The switch disconnector enables disconnection from the main supply right on the machine. The switch disconnector can be locked, e.g. when servicing the machine.

This is an advantage and a safety feature for maintenance of the PALOMAT® unit. The switch disconnector is positioned under the main supply.

Option - Shut Of Valve for PALOMAT® pallet magazine
Shut Of Valve

The shut off valve enables disconnection from the air supply right on the machine. The shut off valve can be locked, e.g. when servicing the machine.

This is an advantage and a safety feature for maintenance of the PALOMAT® unit. The shut of valve is installed directly on the filter regulator.

Option - Pallet handling cold environment
Pallet handling in cold environments down to –25°C

The PALOMAT can be modified with other actuators to enable pallet handling in cold environments down to –25°C.

Option - Prepared for AGV
Prepared for AGV

Prepared for communication with AGV Truck. The PALOMAT® sends a message to the AGV, when the magazine is empty/ full, is ready for delivering/receiving pallets or in case of error respectively.

Prepared for information via SMS/E-mail
Prepared for information via SMS/E-mail

An interface sends an e-mail or SMS to the responsible for the PALOMAT®, e.g. when the magasin is empty or when there is an error with the PALOMAT®. It is installed with a mobile data sim-card (delivered by the customer) or a patchcabel, which is connected to the company’s network.

Brochures
PALOMAT Pallemagasin - Brochure
Data sheets
PALOMAT Pallemagasin - datablad
Feature videos
PALOMAT Pallemagasin - Funktionsvideo
Installation videos
PALOMAT Pallemagasin - Installationsvideo
 

Contact information

 
Company name 
 
Address 
 
Postcode/City 
 
Contact person 
 
Phone no. 
 
E-mail 
 
Country 
 



What is your goal by optimising your pallet handling with PALOMAT®:

  
  
  
  
  
 

PALOMAT® ½ Pallets related products

A tidier work place · Improved work environment · Increased earnings

@2017 - PALOMAT®